Active filters

Bearing spacers...

<p>Specific 8X8mm aluminium bearings spacers. <span style="color:#d0121a;">Only match with Roller quad wheels and Kryptonic</span>, Cadillac, and Gravity (models 2005 and before) wheels. To be used with 8mm axles. The spacers will help keeping the bearings in place into the wheels, improving your riding precision. Set of four spacers</p>
Price €2.08

Axles nuts 8mm(4Pk)

<p>Replacement axles nuts for standard 8mm axles.</p> <p>Set of four</p>
Price €1.67

8mm Axles Speed rings...

<p>Speed rings to fit on standar 8mm axles.</p> <p>Match with most trucks: Paris, randal, Caliber, Tracker, Independant, Seismic, Gullwing, gunmetal,...</p> <p>Set of 4 speed rings (For one truck)</p>
Price €0.79

Bushings cup washers

<p>Bushings cup washers. Set of two</p>
Price €1.88

Sure-Grip Lock Washers...

<p><span>Washers used on the pivot pin to help secure the pin from moving in and out. This is a necessary part when using a truck with an adjustable pivot pin such as Sure-Grip Avenger, Avanti Magnesium,... 4Pk</span></p>
Price €1.67

Aluminium Custom Cut...

<p>3mm depth Aluminium Custom Cut Insoles for roller skate plate mounting on sport shoes. For online orders, please send us a real size draw of your shoes contours. We can also provide rectangular aluminium sheets. <strong>Set of 2 insoles</strong></p>
Price €20.83

Roller Quad Toestop...

<p>Roller Quad Toestop bolts(Set). To be use with bell type stoppers. Diameter 5/16". <strong>Set of 2 bolts</strong></p>
Price €1.67

Roll Line Toe Stop...

<p>This Roll Line toe stop screws will allow you to keep your stoppers in place on most Roll Line plates. <strong>Set of two srews</strong></p>
Price €1.67

Powerdyne Thrust...

<p>Powerdyne Stopper Insert for Powerdyne Thrust plates. Thrust are the nylon plates who usually comes factory mounted on Riedell R3, Dart, She Devil, Vandal rollerskates. Sold individualy</p>
Price €2.50

Roller skates Mounting...

<p>These mounting nuts keep your plates on your skates! It is very important to make sure these are all on your skates. size 10/32" compatible with standard mounting bolts. <strong>Pack of 8 self locking nuts</strong></p>
Price €1.63

Sure-Grip Zero Nuts...

<p>Suregrip Zero Nuts are the lightest after market axle nuts and are made for standard 8mm(1/2") axels. Zero Nuts are adding a colorful touch to your roller skates. They will also helps the long lasting of your bearings by protecting them from the dust. <strong>Pack of 8 Nuts</strong></p>
Price €6.63

Bionic Mounting...

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include 12 phillips head bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>
Price €5.83

Roll Line Ecrous de...

<p>Roll Line Ajustement Kingpin nuts for Variant, Blaster, &amp; Killer plates. Set of two(for one plate)</p>
Price €1.67

Roll Line Mounting...

<p>Roll Line Mounting Hardware for Roller Skates. Roll Line bolts are diameter 3.5mm, witch is a little bit thinner than the US standard. This hardware is matching with the Roll line plates holes. Set of 12 Bolts(4 long+8 short) with nuts and washers.</p>
Price €4.17

Sure-Grip Mounting...

<p>Mounting Hardware set for Roller Skates. Must be use with hard sole shoes such as Roller Derby and Artistic boots. Include bolts 12 bolts(8x3.5m + 4x6.9cm) with washers and nuts.</p>
Price €5.83

Sure-Grip Toe Stop...

<p>This Sure-Grip toe stop screws will allow you to keep your stoppers in place on most Sure Grip plates. Only compatible with the following plates: Avanti, Avenger, Competitor, Cenury, Classic, Cyclone, Magnum, Invader. <strong>Set of two srews</strong></p>
Price €1.67

Powerdyne Toe Stop...

<p>Powerdyne Toe Stop Screws. Match with Powerdyne Falcon &amp; Revenge plates; Roll Line plates all models exept Mirage. Set of 2 screws</p>
Price €2.92

Roll Line Bearing...

<p>Roll Line Bearing Spacers 7x9mm(4 Pk). Diameter 7mm, width 9mm. Those spacers are not standard and are <strong>specifics to Roll Line Wheels</strong> <strong>and 7mm axles</strong>. Set of 4 spacers(for 4 wheels)</p>
Price €2.08

Sure-Grip 7mm Axle...

<p>7mm US self locking Axle Nuts for roller skates. <strong><span style="color:#d0121a;">Only fit plates using 7mm US thread axles.</span></strong> <strong>Set of 8</strong></p>
Price €3.33

Powerdyne Arius Toe...

<p>Powerdyne Arius Toe stop screws. This screw keep the Toe Stop of the POWERDYNE Arius Plate locked. built in washer. <strong>Sold in pairs</strong></p>
Price €3.33

5/8" Stopper Nuts &...

<p>5/8" Stopper Nuts &amp; Washers Set. For locking your 5/8" adjustable stopper to your skate plate. Can be use one Powerdyne Thrust/Triton/Dynapro plates, and Sure Grip plates. Not compatible with plates using bell stopppers or the ones that required Allen key to tighten stoppers. <strong>Set of 2 nuts and 2 washers(For both plates)</strong></p>
Price €3.75

8mm Wide Axle Lock...

<p>8mm Wide Axle Lock Nuts. <strong>Set of 4<br /></strong></p>
Price €1.67

Roll Line Kingpin nut...

<p>Roll Line Kingpin nut locking screws for Blaster/Killer/Variant plates. Set of two(for one plate)</p>
Price €1.67

Roll Line Click Action...

<p>Click Action washer cups. Fits any Roll Line plates using the click action system: Killer(Steel &amp; Titanium), Mistral, Energy(Steel &amp; Titanium), Dance, Matrix(Steet &amp; Titanium), Evo, Raffaello, Ring, Saturno, Giotto, Spin. Set of 4 wahers</p>
Price €10.00

Bont Ignite Mounting...

<p>Bont Ignite Roller skate Mounting Hardware. Including 4 long bolts, 4 short bolts, 8 self locking nuts</p>
Price €11.67

Roll Line 7mm Metric...

<p>7mm Metric self locking Axle Nuts for roller skates. <strong><span style="color:#d0121a;">Only fit European plates using 7mm metric thread axles.</span></strong> <strong>Set of 8</strong></p>
Price €3.33

Roll Line King Pin for...

<p>Roll Line Variant 13mm King Pin for Roll Line Blaster and Killer plates</p>
Price €3.75

Filter By

Brand

Brand

Size

Size